Modded GPS.conf [need ROOT]

This is a GPS.conf script inside the CM, after i had problem with GPS, i learn very basic GPS
i mod this script to optimize the locking speed for Device only GPS mode, and optimize AGPS for LTE network,
Please try and report if its work for you
replace the GPS.conf in system/etc/gps.conf with this :
http://ift.tt/2b2Tpmu
or edit the GPS.conf in editor mode and paste this script (dont forget to back up the old file) - save

Quote:

XTRA_SERVER_1=http://ift.tt/20JLLi0 XTRA_SERVER_2=http://ift.tt/1M3Qa7Q XTRA_SERVER_3=http://ift.tt/20JLLyC #Version check for XTRA #DISABLE = 0 #AUTO = 1 #XTRA2 = 2 #XTRA3 = 3 XTRA_VERSION_CHECK=0 # Error Estimate # _SET = 1 # _CLEAR = 0 ERR_ESTIMATE=0 #Test NTP_SERVER=time.gpsonextra.net #Global #NTP_SERVER=pool.ntp.org #Asia # NTP_SERVER=asia.pool.ntp.org # NTP_SERVER=0.asia.pool.ntp.org # NTP_SERVER=1.asia.pool.ntp.org # NTP_SERVER=2.asia.pool.ntp.org #Europe # NTP_SERVER=europe.pool.ntp.org # NTP_SERVER=0.europe.pool.ntp.org # NTP_SERVER=1.europe.pool.ntp.org # NTP_SERVER=2.europe.pool.ntp.org #North America # NTP_SERVER=north-america.pool.ntp.org # NTP_SERVER=0.north-america.pool.ntp.org # NTP_SERVER=1.north-america.pool.ntp.org # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose # If DEBUG_LEVEL is commented, Android's logging levels will be used DEBUG_LEVEL=4 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Below bit mask configures how GPS functionalities # should be locked when user turns off GPS on Settings # Set bit 0x1 if MO GPS functionalities are to be locked # Set bit 0x2 if NI GPS functionalities are to be locked # default - non is locked for backward compatibility #GPS_LOCK = 0x2 # supl version 2.0 SUPL_VER=0x20000 # Emergency SUPL, 1=enable, 0=disable SUPL_ES=1 #Choose PDN for Emergency SUPL #1 - Use emergency PDN #0 - Use regular SUPL PDN for Emergency SUPL USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 #SUPL_MODE is a bit mask set in config.xml per carrier by default. #If it is uncommented here, this value will over write the value from #config.xml. #MSA=0X2 #MSB=0X1 #SUPL_MODE=0x1 # GPS Capabilities bit mask # SCHEDULING = 0x01 # MSB = 0x02 # MSA = 0x04 # ON_DEMAND_TIME = 0x10 # GEOFENCE = 0x20 # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE CAPABILITIES=0x37 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions # ACCURACY_THRES=5000 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following # SUPL_HOST=supl.host.com or IP # SUPL_PORT=1234 SUPL_HOST=supl.google.com SUPL_PORT=7276 # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 # Bitmask of slots that are available # for write/install to, where 1s indicate writable, # and the default value is 0 where no slots # are writable. For example, AGPS_CERT_WRITABLE_MASK # of b1000001010 makes 3 slots available # and the remaining 7 slots unwritable. #AGPS_CERT_WRITABLE_MASK=0 #################################### # LTE Positioning Profile Settings #################################### # 0: Enable RRLP on LTE(Default) # 1: Enable LPP_User_Plane on LTE # 2: Enable LPP_Control_Plane # 3: Enable both LPP_User_Plane and LPP_Control_Plane LPP_PROFILE=3 ################################ # EXTRA SETTINGS ################################ # NMEA provider (1=Modem Processor, 0=Application Processor) NMEA_PROVIDER=0 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) SGLTE_TARGET=1 ################################################## # Select Positioning Protocol on A-GLONASS system ################################################## # 0x1: RRC CPlane # 0x2: RRLP UPlane # 0x4: LLP Uplane A_GLONASS_POS_PROTOCOL_SELECT=0x4

you can also change / add the NTP server based on your region from here http://ift.tt/QxFQNf
Enjoy

from xda-developers http://ift.tt/2aONkqz
via IFTTT