Hello,
http://ift.tt/2bRnelP
This ROM looks great !!! I managed strictly following the steps below to install the rom on my S7 Edge once. Later I wanted to reflash the ROM to change things in AROMA. Since it is impossible for me to go beyond the boot Samsung screen (every time I wait more than 30 minutes, it seems blocked and the phone becomes hot). Since I tried doing all the steps again thinking to reflash the CP and BL, TWRP, and disable encryption of /data partition etc but I still have the same problem.
During the installation of the ROM, I tried several setups, with or without root, with differents kernels etc, nothing works, the installation goes smoothly. It's just that the phone remains locked at startup ("Samsung Galaxy S7 edge, POWERED BY android").
I have Odin 3.10.7 and 3.12.3, TWRP 3.0.2-3hero2lte, BL_G935FXXU1BPH6 and CP_G935FXXUBPH1 and no-verity-opt-encrypt-2.1.
I also tried flashing stock rom and then Superman and fail again.
Could someone help me ?
Thank you.
(I just didn't do the step with CSC because it's seems to be optional)
1. Start your phone, go to settings, about device, software info and hit build.number around 10 times so developer options will show up
2. Open developer options and tick: OEM unlock
3. Shut your phone off
4. You now need a computer, download odin3.10.11
5. Download two files, first is bootloader and second modem: bootloader and modem
6. Boot your phone into download mode by pressing: home+volume down+ power on
7. Open the downloaded odin on your windows pc and click on BL tab and add the file that name begins with BL, same for CP tab
8. After this, reboot to download mode again
9. Install TWRP (latest one is needed to support new BL's) will be next step, for this, follow all steps provided in this forum: TWRP Thread (booting into download mode: press home+volume down+power on, booting into download mode press: home+volume up+power on)
10. when you got TWRP working: We need to disable encryption, for this you should boot into recovery mode (as described above)
11. Flash this on your phone
12. After flashing this, hit wipe, full wipe (this will clean all internal memory and your data will be lost!!)
13. you can test if encryption is still enabled, if TWRP shows error about not mounting /data your phone is still encrpyted
14. Now you can download the rom onto your PC and then transfer it via usb to your phone
15. It is rom installing time install the rom!
16. After successfully installing the rom hit reboot and you are good to go!
17. If you want you can use my csc selection to get your desired csc, if you want that you can grab it here: CSC Selection V1.6
http://ift.tt/2bRnelP
This ROM looks great !!! I managed strictly following the steps below to install the rom on my S7 Edge once. Later I wanted to reflash the ROM to change things in AROMA. Since it is impossible for me to go beyond the boot Samsung screen (every time I wait more than 30 minutes, it seems blocked and the phone becomes hot). Since I tried doing all the steps again thinking to reflash the CP and BL, TWRP, and disable encryption of /data partition etc but I still have the same problem.
During the installation of the ROM, I tried several setups, with or without root, with differents kernels etc, nothing works, the installation goes smoothly. It's just that the phone remains locked at startup ("Samsung Galaxy S7 edge, POWERED BY android").
I have Odin 3.10.7 and 3.12.3, TWRP 3.0.2-3hero2lte, BL_G935FXXU1BPH6 and CP_G935FXXUBPH1 and no-verity-opt-encrypt-2.1.
I also tried flashing stock rom and then Superman and fail again.
Could someone help me ?
Thank you.
(I just didn't do the step with CSC because it's seems to be optional)
1. Start your phone, go to settings, about device, software info and hit build.number around 10 times so developer options will show up
2. Open developer options and tick: OEM unlock
3. Shut your phone off
4. You now need a computer, download odin3.10.11
5. Download two files, first is bootloader and second modem: bootloader and modem
6. Boot your phone into download mode by pressing: home+volume down+ power on
7. Open the downloaded odin on your windows pc and click on BL tab and add the file that name begins with BL, same for CP tab
8. After this, reboot to download mode again
9. Install TWRP (latest one is needed to support new BL's) will be next step, for this, follow all steps provided in this forum: TWRP Thread (booting into download mode: press home+volume down+power on, booting into download mode press: home+volume up+power on)
10. when you got TWRP working: We need to disable encryption, for this you should boot into recovery mode (as described above)
11. Flash this on your phone
12. After flashing this, hit wipe, full wipe (this will clean all internal memory and your data will be lost!!)
13. you can test if encryption is still enabled, if TWRP shows error about not mounting /data your phone is still encrpyted
14. Now you can download the rom onto your PC and then transfer it via usb to your phone
15. It is rom installing time install the rom!
16. After successfully installing the rom hit reboot and you are good to go!
17. If you want you can use my csc selection to get your desired csc, if you want that you can grab it here: CSC Selection V1.6
from xda-developers http://ift.tt/2bS3hAf
via IFTTT
No comments:
Post a Comment