H631 T-MOBILE UNBRICK GUIDE
So I recently bricked my phone trying to root it with MarshMallow 6.0 and wanted to make a guide on how I managed to unbrick for anyone with the same problem.
WARNING: ALL SETTING/APPS/FILES WILL BE LOST.
I was stuck in a bootloop and LG Bridge wasn't working with the phone to restore it.
REQUIRED ITEMS
1.) LG Flash Tool DOWNLOAD HERE
2.) LG Driver DOWNLOAD HERE
3.) Stock KDZ DOWNLOAD HERE (This will take you back to 5.1.1 stock)
1) Put your phone into Download Mode. To do this, hold the volume up key while plugging the phone into you computer. Don't let go of the volume up key until your in Download Mode and you see the screen where it says "Firmware Update"
2) Unzip LG FLash Tool and run as administrator. You shouldn't have to change any of your settings but it should read this:
"Select Type" - CDMA
"Phone Mode" - DIAG
"Reset Time" - 33000
Select the KDZ file you downloaded "H63110j_00.kdz"
4.) Click CSE Flash
5.) Click Start
6.) Don't change the Country or Language.
Click "Clear Phone Software Update Registry"
Click "OK"
Now click OK to start the installation.
7.) Then let the program run and it might say that it lost connection or timed out but just click ok
If you look down at your phone you will see the percentage increasing as the installation goes on.
Once the phone is done it will reboot. Unplug it as soon as it starts the reboot after installation.
Your phone should now be unbricked! :good:
Not sure how this works on Boost/Verizon/Sprint. If you download the proper KDZ it should all work the same.
MetroPCS KDZ File ( Thanks @GameTheory. )
LP 5.1.1 MS631v10d
http://ift.tt/1UlkdxP
LP 5.1.1 MS631v10i
http://ift.tt/1R3oJh8
LP 5.1.1 MS631v10j
http://ift.tt/1Ulkfpw
-------------------------------------------------------------------------------------------------------------------------------
H636 Fido Variant v10i (Thanks @asidorowicz)
http://ift.tt/1Ulkfpy
H636 Fido Variant v10k ( Thanks @fearhq )
http://ift.tt/1UlkfpA
Links provided by DrakenFX
So I recently bricked my phone trying to root it with MarshMallow 6.0 and wanted to make a guide on how I managed to unbrick for anyone with the same problem.
WARNING: ALL SETTING/APPS/FILES WILL BE LOST.
I was stuck in a bootloop and LG Bridge wasn't working with the phone to restore it.
REQUIRED ITEMS
1.) LG Flash Tool DOWNLOAD HERE
2.) LG Driver DOWNLOAD HERE
3.) Stock KDZ DOWNLOAD HERE (This will take you back to 5.1.1 stock)
1) Put your phone into Download Mode. To do this, hold the volume up key while plugging the phone into you computer. Don't let go of the volume up key until your in Download Mode and you see the screen where it says "Firmware Update"
2) Unzip LG FLash Tool and run as administrator. You shouldn't have to change any of your settings but it should read this:
"Select Type" - CDMA
"Phone Mode" - DIAG
"Reset Time" - 33000
Select the KDZ file you downloaded "H63110j_00.kdz"
4.) Click CSE Flash
5.) Click Start
6.) Don't change the Country or Language.
Click "Clear Phone Software Update Registry"
Click "OK"
Now click OK to start the installation.
7.) Then let the program run and it might say that it lost connection or timed out but just click ok
If you look down at your phone you will see the percentage increasing as the installation goes on.
Once the phone is done it will reboot. Unplug it as soon as it starts the reboot after installation.
Your phone should now be unbricked! :good:
Not sure how this works on Boost/Verizon/Sprint. If you download the proper KDZ it should all work the same.
MetroPCS KDZ File ( Thanks @GameTheory. )
LP 5.1.1 MS631v10d
http://ift.tt/1UlkdxP
LP 5.1.1 MS631v10i
http://ift.tt/1R3oJh8
LP 5.1.1 MS631v10j
http://ift.tt/1Ulkfpw
-------------------------------------------------------------------------------------------------------------------------------
H636 Fido Variant v10i (Thanks @asidorowicz)
http://ift.tt/1Ulkfpy
H636 Fido Variant v10k ( Thanks @fearhq )
http://ift.tt/1UlkfpA
Links provided by DrakenFX
from xda-developers http://ift.tt/1R3oH8U
via IFTTT
No comments:
Post a Comment